AUCTION  -  ONE EVENING

Collectables Surfboards

1 - 117      


1            Hohensee Single Stringer

              9’ x 23 ½”

              1966, made in Queensland.

              Red gloss coat with white competition stripes.

              Good condition.

              $500 – 1,000

            

  1.jpg (59059 bytes) 1 (5).jpg (52676 bytes)

  HAMMER PRICE $800


             

2            McTavish Classic Single Fin

              6’6” x 20” round tail.

              Excellent condition.

              $500 – 1,000

              2.png (525611 bytes) 2 (3).png (847075 bytes)

             2 (2).png (174146 bytes) 

              Image/s courtesy vonweirdos.com

HAMMER PRICE $800

            


3            Farrelly early 1970 Single Fin

              An original 1971 single fin by the great

              Midget Farrelly, Australian World Champion

              surfer. This 6’ x 19” is one of the original “s”

              deck shortboards from this important period

              In surfing history and would be right at home

              in any serious collection.  This board is

              unrestored with only a few small dings that

              have been repaired, and it’s straight with no

              delaminations, and with a hole in the fin

              for a legrope.

              $300 - 700

              3.png (478166 bytes) 3 (3).png (468405 bytes)

               3 (2).png (329638 bytes)

                Image/s courtesy vonweirdos.com        

HAMMER PRICE $850


    

4            Balsa Mal

              9’2” long x 20 ½”

              Circa 1958/59 – All original one owner, unknown

              shaper/brand. Light blue pigment all over, red fin

              on tails edge

              $1,000 - 2000

              4 (2).jpg (84189 bytes) 4 (4).jpg (86418 bytes)

              4 (6).jpg (49550 bytes)

HAMMER PRICE $1050


             

5            Barry Bennett Squaretail

              A mid ‘70s single fin squaretail by the respected

              Sydney surf factory, Bennetts.

              6’8” x 19”

              Has had a few dings repaired and is a bit brown

              on the bottom, but the deck still shows well.

              $200 - 400

             

               

             Image/s courtesy vonweirdos.com    

   HAMMER PRICE $375


  

6            Barry Bennett Yellow Swallow Tail

              7’ x 19” single fin

              1974. Very good condition

              $700 – 1,400

              6.jpg (23982 bytes)  6 (3).jpg (25519 bytes)

  HAMMER PRICE $750


             

7            Bing Surfboards

              Made in America for the Australian market.

              7’10” long x 21 ½” wide, 1969

              This single stringer, pin tail single fin has the Bing

              logo with the kangaroo on one section.  With

              the wave set fin box and large raked red fin, this

              is an unusual board. Whilst made for the Australian

              market it never left the American shores until recently.

              $300 - 600

              7.jpg (36632 bytes) 7 (3).jpg (37367 bytes)

             7 (7).jpg (57871 bytes)

  HAMMER PRICE $700


             

8            Blaxell Single Fin

              Pintail, 6’7” x 20”, 1974.

              Attractive colours with Tom’s unique logo

              $100 - 250

              8.jpg (80795 bytes) 8 (3).jpg (92159 bytes)

              8 (5).jpg (48220 bytes)

  HAMMER PRICE $500


             

9            Bob Brown Single Fin

              Any fractures or dings have been repaired the

              old school way and the shape is by Rico.

              Measures 6’ x 19 ½” and features fluted flyers

              and nice original fiberglass fin in the box, plus

              a fabulous period spray. 1976.

              Condition – this rates a healthy 8/10

              $350 - 700

             

                

  HAMMER PRICE $650


             

10          Paipo Body Board Floral Design

              Floral design on bottom, twin fin.

              Made in Portsea, Victoria.

              $300 - 600

              10.jpg (39129 bytes)  10 (3).jpg (70048 bytes)

              10 (5).jpg (66221 bytes)I

              image/s courtesy vonweirdos.com

  HAMMER PRICE $300


             

11          Plywood Body Board

              4’6” x 17”

              1940’s with handle made by Wards boat

              builder in Cottesloe.  Later famous for

              Australia’s Americas Cup Winner.

              $40 - 80

            11.jpg (231396 bytes)  11 (3).jpg (86360 bytes)

  HAMMER PRICE $700


             

12          Brothers Neilsen

              Shaped by Rick Neilsen for their Surfers

              Paradise shop circa 1976.

              Measures 6’11” x 19 1/2” and is totally

              original and unrestored.

              $600 – 1,200

              12.png (415664 bytes) 12 (4).png (380643 bytes)

              12 (2).png (561916 bytes) 12 (3).png (536866 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $1050


13          Byrning Spears Epoxy Thruster c.1980’s

              Al Byrne. Experimental plastic surfboard.

              Possible connection with McTavish.

              $400 – 800

              13.png (599550 bytes) 13 (2).png (750409 bytes)

              13 (3).png (667439 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $450


14          Cole Single Stringer Longboard

              9’ 9 ½” x 23”

              Circa 1965.

              Square Tail.

              Average condition.

              $700 – 1,400

              14.jpg (56071 bytes) 14 (3).jpg (55205 bytes)

  HAMMER PRICE $750


             

15          Cooper Single fin Swallow tail shaped by

              Richie West

              This is a great example of a mid 70s Cooper

              single fin shaped by American surfer Richie West,

              and it’s a fine rider.  Has West’s interpretation of

              the concave bottom that was so successful in

              California’s waves and still used by some of today’s

              top shapers such as Dick van Straalen.

              Measures 6’6” x 20” with plenty of nose area.

              West’s design was known as the Bullett Model

              and for good reason.  Apart from the rails being

              touched up this is a good original board with a

              few minor dings in the bottom from the rocks

              Around Cook Island in northern NSW.

              $300 - 600

              15.png (618278 bytes) 15 (2).png (575814 bytes)

              15 (3).png (478528 bytes) 15 (4).png (383104 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $525


16          Cordingley Red Stripe Mal

              Single fin, square tail 9’6” long x 22”, red stripes

              with white band – 1965.

              Good condition.

              $400 – 800

              16.jpg (71193 bytes) 16 (3).jpg (66719 bytes)

              16 (5).jpg (106742 bytes) 16 (7).jpg (51542 bytes)

  HAMMER PRICE $1400


             

17          Cordingley Swallow Tail

              6’9” x 20”. Circa 1976.

              This single stringer was shaped and signed by

              Bob Monkman.  Green top and bottom with

              yellow pin stripe on deck.

              $200 – 450

              17.jpg (47894 bytes) 17 (3).jpg (50648 bytes)

               17 (9).jpg (58215 bytes) 17 (5).jpg (93754 bytes)

               17 (7).jpg (63396 bytes)

  HAMMER PRICE $700


             

18          DHD Stephanie Gilmore Competition Board

              6’5” long x 18 1/8”.

              Ridden by Steph during the 3rd World Title

              2010. Thruster with pink deck grip, signed by

              Stephanie.

              $500 – 1,000

              18.jpg (35945 bytes) 18 (3).jpg (49753 bytes)

             18 (7).jpg (59887 bytes) 18 (5).jpg (37559 bytes)

  HAMMER PRICE $1350


             

19          DHD Swallow Tail shaped by Maurice Cole,

              Jake Paterson personal board

              Ridden by Jake in competition.  This board is

              extremely light.  Features the snake logo,

              crescent tail and thruster design. Length 5’11”

              $150 – 300

             19.jpg (71008 bytes)  19 (3).jpg (59173 bytes)

             19 (5).jpg (50565 bytes)

  HAMMER PRICE $325


             

20          Dick Brewer Gun

              Three stringer, single fin pintail.

              9’10” x 20”.  Attractive plum red in colour

              with black fin.  Made by Dick in 2010 during his

              visit to Noosa for the surf festival.  A prime

              example by the master shaper.

              $2,000 – 3,000

              20.jpg (43034 bytes) 20 (3).jpg (41590 bytes)

              20 (5).jpg (105109 bytes) 20 (7).jpg (105028 bytes)

              20 (9).jpg (74939 bytes)

  HAMMER PRICE $3700


             

21          Dick Brewer Pipeline Series

              9’4” x 23 1/2’

              Manufactured 2010, personally shaped by Dick.

              $800 – 1,600

              21 (8).jpg (36224 bytes) 21 (2).jpg (39513 bytes)

             21 (4).jpg (97660 bytes) 21 (6).jpg (66678 bytes)

  HAMMER PRICE $2850


             

22          Dick Brewer – Sam Hawk

              6’10” x 19”, 1972 model

              Under the tutelage of Dick Brewer, Sam Hawk

              emerged as one of Brewer’s best protιgιs of the

              70’s.  Sam’s shapes became highly demand

              throughout the era. Superb example of the flat

              deck, full rail school of design, this swallow tail,

              single fin features dark blue tint bottom and lapis,

              blue tint glass on fin, light blue tint deck with ink

              lines and resin pin line, with the Brewer logo, Sam’s

              signature and board number “045” on the blank.

              $1,000 – 2,000

              22 (10).jpg (52266 bytes) 22 (2).jpg (81197 bytes)

             22 (4).jpg (89816 bytes) 22 (6).jpg (102668 bytes)

             22 (8).jpg (67070 bytes)

  HAMMER PRICE $3800


             

23          Dick van Straalen Single Fin

              This is a 7’1 x 19” gem in original unrestored

              condition, and as such is a very rare board.

              Has a fin box with a nice handfoiled glass fin as well,

              made c.1977.  Condition – A good 8/10 as it’s had a

              few minor dings repaired but has not been restored.

              $750 – 1,500

                

               

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $1900


24          Don Burford Single Fin Gun

              Pintail gun 6’10” x 19”

              Great looking board.

              Immaculate condition.

              $500 – 1,000

              24 (2).jpg (101145 bytes) 24 (4).jpg (120833 bytes)

             24 (6).jpg (45940 bytes) 24 (8).jpg (91801 bytes)  

 

HAMMER PRICE $1050


             

25          Downing Hawaii Single Fin

              A rare mid 70s single fin from one of the most

              influential shapers in Hawaii, the legendary George

              Downing 1974.

              Condition – an honest 7/10 with a few minor dings

              that are repaired plus some deck depressions and

              sunburn. A very rare board in this country that

              displays well.

              $300 - 600

       

                    

             Image/s courtesy vonweirdos.com

  HAMMER PRICE $1500


26          Dragan “Get Air” model

              6” x 19”

              Shaped in the 1980’s this thruster has a water

              channel from just under the nose tip and exiting

              through the board in the middle of the three fins.

              Designed to reduce drag and create lift at the rear

              of the board.

              $450 - 900

              26 (10).jpg (38501 bytes) 26 (2).jpg (41656 bytes)

              26 (4).jpg (74492 bytes) 26 (8).jpg (33777 bytes)

  HAMMER PRICE $800


             

27          Egan Cole Smith model

              Pintail single fin.

              6’1” x 20” shaped by Col Smith.

              Has double flyers and a channel bottom.

              Immaculate condition.

              $400 - 800

              27 (2).jpg (76956 bytes) 27 (8).jpg (80714 bytes)

            27 (6).jpg (95553 bytes)

  HAMMER PRICE $1000


             

28          Egan Stringerless Mal

              9’6” long x 23 ½”

              All clear V bottom, volan glass, circa 1968

              Excellent condition.

              $600 – 1,200

              28 (2).jpg (81064 bytes) 28 (8).jpg (73709 bytes)

             28 (4).jpg (40648 bytes)

  HAMMER PRICE $1800


             

29          Etherington Channel Single Fin

              Circa 1981 by the talented Tony Eltherington.

              This has likely been a custom or else a personal board

              as it’s got a textured deck without any gloss coat.

              Lighter and easy to wax, and in 9/10 condition.

              Perhaps the red has been added recently to maybe

              cover a ding or two. Measures 6’1” x 19” x 2 ½”.

              $350 - 700

              29.png (514397 bytes) 29 (3).png (692483 bytes)

             29 (2).png (408634 bytes)

             Image/s courtesy vonweirdos.com

  HAMMER PRICE $525


30          Energy Thruster Flyer Swallow Tail

              6’3 ½” x 20” shaped by Simon Anderson in 1988.

              Yellow fade deck with great logo on nose, clear

              bottom.

              $200 - 400

              30 (8).jpg (86289 bytes) 30 (2).jpg (83684 bytes)

              30 (4).jpg (71122 bytes)

  HAMMER PRICE $600


             

31          Den Kielu Single Fin

               4'11"

                $300 - 900

              HAMMER PRICE $350


             

32          Fluid Foils & Shane Quad Fin

              From 1981 in 9/10 condition.

              5’9” x 20” shaped by Tony McDonagh for Fluid

              Foil and Shane Surfboards. Great spray, channel

              bottom, cool decals and 4 fins.

              $350 - 700

              32.png (522352 bytes) 32 (3).png (516245 bytes)

              32 (2).png (611613 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $500


33          Glastron Industries Solid Balsa

              8’1” x 19 Ό”

              Circa 1958.

              Excellent condition.

              $900 – 1,800

              33 (2).jpg (27121 bytes) 33 (4).jpg (26641 bytes)

             33 (6).jpg (27960 bytes)

              HAMMER PRICE $1250


34          Glen Winton Four Fin Channel Bottom

              6’ x 20 ½”. 1981.

              Excellent condition.

              $300 - 600

           34.png (583068 bytes)   34 (3).png (643931 bytes)

           34 (2).png (397640 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $650


35          Goodtime Semi Gun Single Fin

              7’8” x 20”

              This single stringer has a rounded square tail

              and a great logo. 1973

              $200 - 400

              35 (10).jpg (49532 bytes) 35 (2).jpg (46034 bytes)

             35 (6).jpg (50389 bytes) 35 (4).jpg (63324 bytes)

  HAMMER PRICE $450


             

36          Gordon & Smith Bondi Underground

              Pintail single fin.

              6’10” x 20”

                1974

Brad Mayes was the Bondi Underground

              in his radical approach to surfing and life in

              general.  Yellow/red deck with pin stripes.

              All red bottom. Great design and logo. Shaped by

              Brad Mayes.  Excellent condition.

              $400 - 800

              36 (10).jpg (63672 bytes) 36 (2).jpg (64997 bytes)

              36 (4).jpg (84620 bytes) 36 (6).jpg (65358 bytes)

              36 (8).jpg (49597 bytes)

  HAMMER PRICE $1350


             

37          Gordon & Smith Bronzed Aussies, Ian Cairns

              7’6 ½” x 20”, pintail single stringer, Australian colours

              With Bronzed Aussies sticker and Ian’s own

              kangaroo motif.  Kanga was king at sunset, PT was

              World champ and the Bronzed Aussies ruled.  It was a

              moment in history and this board captures it.  Designed

              for the chunky waves in which Ian excelled.  From an

              era that was based on the movie “Knocking Down the

              Door”. 1976.

              $350 – 700

              37 (12).jpg (51561 bytes) 37 (2).jpg (51907 bytes)

             37 (4).jpg (89443 bytes) 37 (8).jpg (32101 bytes)

  HAMMER PRICE $2700


             

38          Gordon & Smith Pintail

              Single fin shaped by Robert Conneley..

              6’10” x 20 ½”, yellow deck, white pin stripes

              and blue bottom. 1975.

              $400 - 800

              38 (12).jpg (61310 bytes) 38 (2).jpg (54933 bytes)

              38 (4).jpg (69154 bytes) 38 (6).jpg (48593 bytes)

              38 (10).jpg (43284 bytes)

  HAMMER PRICE $950


             

39          Gordon & Smith Single Fin

              6’x 20”, round tail with flyers.

              A Peter Townend/Tubeshooter.

              Shaped by Peter Townend, 1973. Dolphin logo,

              white panel deck, red bottom.

              $200 - 400

              39 (2).jpg (62958 bytes) 39 (8).jpg (79881 bytes)

              39 (6).jpg (88493 bytes) 39 (4).jpg (44358 bytes)

  HAMMER PRICE $1150


             

40          Gordon & Smith Single Fin Stringer Gun

              7’3” x 20”, 1977.

              All time stinger swallow tail by Steve Griffiths.

              All blue pigment. Immaculate example.

              $300 - 600

              40 (2).jpg (88847 bytes) 40 (4).jpg (85720 bytes)

             40 (6).jpg (90404 bytes) 40 (8).jpg (50086 bytes)

  HAMMER PRICE $1200


             

41          Gordon Woods Single Stringer, With Competition strips

              9’8” x 22”

              Average condition.

              Circa 1963/64

              $500 – 1,000

             41 (4).jpg (56708 bytes) 41 (2).jpg (56116 bytes)

  HAMMER PRICE $800


             

42          Gordon Woods Single Stringer

              9’7” x 22”

              Built in 1961, this board is in absolutely original

              condition and had one owner until purchased in 2010.

              Clear with blue competition stripes, with early raked fin.

              Signed by Gordon Woods. A fine example.

              $1,500 – 3,000

              42 (10).jpg (40036 bytes) 42 (2).jpg (40930 bytes)

             42 (4).jpg (93764 bytes) 42 (8).jpg (34265 bytes)

  HAMMER PRICE $3400


             

43          Greg Laurenson Single Fin

              This round tail board is 6’8” long x 21 ½” wide.

              Red in colour with Greg’s dolphin logo, it

              is a great example. 1976.

              $150 - 300

              43 (10).jpg (41864 bytes) 43 (2).jpg (43791 bytes)

              43 (4).jpg (85586 bytes)

  HAMMER PRICE $900


             

44          Hansen by Gerry Lopez

              Shaped by master shaper Gerry Lopez when

              working for Hansen Surfboards.

              7’ 1 1/2 “ long x 21” wide.

              This single stringer, single fin, round tail is a good

              example of Gerry’s work.  1972..

              Blue bottom with clear deck.

              $400 - 900

              44 (2).jpg (38374 bytes) 44 (8).jpg (54032 bytes)

             44 (4).jpg (53089 bytes) 44 (6).jpg (108984 bytes)

  HAMMER PRICE $700

             


             

45          Hardy Single Fin Gun

              Pintail 7’ x 20”

              Shaped by Tony Hardy at Margaret River.

              Great condition.

              $500 – 1,000

             45 (6).jpg (75639 bytes)  45 (2).jpg (73924 bytes)

            45 (4).jpg (45449 bytes)

  HAMMER PRICE $1250


             

46          Tom Blaxell Single Fin

              8'1"

             $300 - 900

  HAMMER PRICE $300


             

             

47          Hollow Plywood Paddle/Surfboard

              ‘50s Australian crafted ‘cigar box’ type paddle-

              Surfboard.  Original example of a multi-purpose

              hollow surf craft constructed of marine plywood

              and timber.

             

              8’ x 23” model, well-constructed using nails not

              screws, and a varnish finish.  Solid timber keel

              type skeg and a bung in the tail.

             

              Often these plywood boards were built at

              boatbuilding yards between bigger jobs, and many

              were used as stand-up paddle surfboards,

              particularly in Victoria and South Australia.

             

              They were also called “kook boxes” by surfers

              with more progressive surf equipment.

             

              Condition – this is an excellent example with one

              repaired ding in the bottom only, and missing it’s

              Bung plug.

              $300 - 600

           47.jpg (50131 bytes)   

             Image/s courtesy vonweirdos.com          

HAMMER PRICE $800


  

48          Hollow Wooden Ply Okinui

              7’9” long

              From the 40’s with a wild and wacky 60’s

              paint job.

              $200 - 400

              48 (6).jpg (55500 bytes) 48 (2).jpg (60496 bytes)

            48 (4).jpg (59475 bytes)

  HAMMER PRICE $500


             

49          Hollow Wooden Toothpick by Barry Jarrott

              And Stan Smith

              16’5” long overall.

              Made by Barry and Stan in 1960.  Paddled in

              competition by Barry (Young Duke) Jarrott for

              Cottesloe Surf Club.  Wooden Dowls to save

              weight.  Excellent condition.

              $300 - 500

              49 (6).jpg (106939 bytes) 49 (2).jpg (152308 bytes)

             49 (4).jpg (113544 bytes)

  HAMMER PRICE $2100


             

50          Hot Buttered Twin Fin

              1975 model shaped by Frank Williams

              Measures 6’3” x 19 ½” and it’s quite narrow in

              the tail with the fins really close together.

              Condition – 7.5/10

              Very similar to a few longer Hawaiian twinnies,

              except for the flyers.  An interesting board with a

              cool spray job and the famous Hot Buttered logo.

              $300 - 600

             

             

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $700


51          Hot Stuff Allan Bryne Design

              A 5’10” x 20” flyer rounded pin design by master

              shaper Al Bryne.  Was a custom for Currumbin

              surfer Ray Sawtell, and dates from around 1978.

             

              It’s a lightweight model from the Hot Stuff factory,

              where the Rabbit single fins were also produced

              during the late ‘70s.

             

              This is a total original one owner by one of the most

              respected surfer shapers in the country.

              Beautiful original timber and glass fin.

              Condition – 8/10

              $300 – 600

             

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $1000


52          Hot Stuff Peter Townend board

              6’6” x 20”

              1975.

              This is one of them that he has had signed over

              the last few years.

              Condition – 8/10

              $700 – 1,400

              52 (4).png (590891 bytes) 52 (2).png (502381 bytes)

             52.png (542530 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $1650


53          Hot Stuff Single Fin Wayne Rabbit Bartholemew

              6’1” x 20”

              Single fin round tail, ridden by Rabbit and signed by

              him.  Very good condition.

              $700 – 1,400

              53 (3).png (694824 bytes) 53.png (738206 bytes)

              53 (2).png (357580 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $1400


54          Tom Hoy Precision Equipment Single Fin

              Shaped by Tom Hoy this single fin, channel bottom,

              with double flyers and a swallow tail has a stepped

              bottom around the fin area.  One of Tom’s

              Experimentals.

              5’11 1/2” x 21”

              1978.

              $300 - 600

              54 (10).jpg (46997 bytes) 54 (2).jpg (73479 bytes)

              54 (4).jpg (57106 bytes) 54 (8).jpg (67302 bytes)

              54 (6).jpg (78787 bytes)

  HAMMER PRICE $550


             

55          Hoye Single Fin

              6’8” x 19”

              1973

              Pintail, shaped by Tom Hoye when based at

              Yallingup. With Tom’s Indian on horseback logo.

              $150 - 300

              55 (8).jpg (81873 bytes) 55 (2).jpg (92114 bytes)

              55 (4).jpg (44201 bytes) 55 (6).jpg (92434 bytes)

  HAMMER PRICE $775


             

56          Jacko Single Fin Swallow Tail

              6’8” x 18 ½”

              1973.

              $225 - 500

              56 (10).jpg (29031 bytes) 56 (2).jpg (29572 bytes)

             56 (6).jpg (45192 bytes) 56 (4).jpg (46525 bytes)

            56 (8).jpg (30346 bytes)

  HAMMER PRICE $350


             

57          Jacko Single Stringer Thruster

              6’ x 21”

              Flyer round tail.

              Mint condition.

              Circa 80’s.

              $500 – 1,000

              57 (2).jpg (31988 bytes) 57 (4).jpg (29959 bytes)

HAMMER PRICE $675


              

58          Joel Parkinson Kustom Competition Board

              6’1 ½” long x 19” thruster.

              2010

              Ridden and signed by Joel Parkinson as one of

              his competition boards.  Excellent condition.

              $500 – 1,000

              58 (2).jpg (35969 bytes) 58 (8).jpg (42165 bytes)

            58 (4).jpg (64594 bytes) 58 (6).jpg (35033 bytes)

  HAMMER PRICE $900


             

59          W/D


             

60          Kiama Surfboards Mike David Designs

              Shaped by Billy Tollhurst

              Pintail single fin with flyers

              7’2” long x 19 ½”

              yellow with great design on bottom and logo

              on deck.  Excellent condition.

              $300 – 600

              60 (10).jpg (54231 bytes) 60 (2).jpg (50414 bytes)

             60 (4).jpg (66415 bytes) 60 (6).jpg (39987 bytes)

  HAMMER PRICE $600


             

61          Aragorn Pintail Single Fin

              1975 Aragorn pintail from Kirra in

              Queensland.  Shaped by Bill Robertson.

              6’10” x 19” it’s a classic Kirra Point model.

              The overall condition is very good and could

              easily be improved on.

              $300 - 600

              61.png (763071 bytes) 61 (3).jpg (94282 bytes)

             61 (2).png (555472 bytes)

  HAMMER PRICE $425


             

62          Klemm-Bell Pintail Single Fin

              7’ x 19” with flyers.

              Blue bottom with sunrise deck.

              1975.

              $250 - 500

              62 (2).jpg (31090 bytes) 62 (8).jpg (34548 bytes)

              62 (6).jpg (32170 bytes)

  HAMMER PRICE $1100


             

63          Kneeboard – Energy Thruster

              Simon Anderson Thruster kneeboard

              1980 likely fairly rare.

              Measures 5’6” x 23”

              Condition – 6/10 with obvious repairs and

              depressions.

              $300 - 600

             

          

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $275


64          Kneeboard – George Greenough Design Spoon

              Very attractive design work.

              Great condition.

              4’8” x 20”

              A fine example of the spoon, 1969.

              $600 – 1,200

              64 (6).jpg (68684 bytes) 64 (2).jpg (66675 bytes)

             64 (4).jpg (80714 bytes)

  HAMMER PRICE $1800


             

65          Kneeboard – George Greenough Flextail

              A rare Greenough Design flextail made in the

              Sky factory at Byron Bay by Michael Cundith and

              George around 1976.

             

              A rare collaboration by a great designer and a top

              shaper.

             

              Measure 5’7” x 22” with a single fin box and a rare

              polycarbonate Greenough type fin, with a concave

              hull design.

             

              Condition – 7/10 as a significant ding repair on the

              bottom, plus a few minor dings and fractures, but

              totally original and still displays well.

             

              $1,000 – 2,000

             

             Image/s courtesy vonweirdos.com

  HAMMER PRICE $1800


             

66          Kneeboard – Hoye Spoon – Precision

              Equipment Spoon

              5’7” x 22”

              Shaped by Tom Hoy in his shop at Yallingup.

              Tom was recognised as introducing the twin fin to

              Australia from America.  He shaped many boards

              during his stint at Yallingup and Margaret River

              where he now resides.

              1969.

              66.png (496272 bytes) 66 (5).png (608393 bytes)

             66 (4).png (490416 bytes) 66 (3).png (545799 bytes)

              Image/s courtesy vonweirdos.com  

              Unsold


67          Legend Point Longboards shaped by Rooster

              Shaped by Darrell Dell (Rooster).  This board is

              Palonia veneer with foam centre and balsa rails.

              Three mahogany stringers with thruster fin set up.

              Real craftsman’s product with nose and tail blocks in

              mahogany.

              10’ x 23 ½” x 3”

              $1,000 – 2,000

              67 (2).jpg (48548 bytes) 67 (14).jpg (42157 bytes)

              67 (12).jpg (52882 bytes) 67 (4).jpg (125750 bytes)

  HAMMER PRICE $2400


             

68          Len Dibben Pintail Single Fin

              Attractive yellow and orange spray job.

              This 7’4” x 21” is a great example of one of

              Len’s boards.

              $400 - 800

              68 (2).jpg (107862 bytes) 68 (4).jpg (171538 bytes)

              68 (6).jpg (40117 bytes)

  HAMMER PRICE $825


             

69          Lightning Bolt Gun by Rory Russell

              8’4” long x 20” wide.

              This attractive swallow tail, single stringer has

              yellow top with red rails and bottom with lightning

              bolts in contrasting colours, both top and bottom.

              Singed by Rory Russell, this is a great example

              of his workmanship.  One of the legends of 

              Hawaiian surfing.

              $1,800 – 3,600

             69 (8).jpg (36614 bytes)  69 (2).jpg (64523 bytes)

            69 (6).jpg (34614 bytes)

  HAMMER PRICE $3100


             

70          Mark Richards Bat Tail

              6’3” x 21”

              Fairly rare

              c. 1980

              70 (3).png (646175 bytes) 70.png (701339 bytes)

              70 (2).png (665203 bytes)

              Image/s courtesy vonweirdos.com

  UNSOLD, AVAILABLE AT $2500


71          McCoy Lazor Zap

              Only 5’6” X 19 ½”.

              An iconic shape by Geoff McCoy from 1982/3

              Made famous by the outrageous surfing of Cheyne

              Horan.  The fact that they got together with the late

              Ben Lexan on the winged keel style “star fin” makes

              these little boards super collectable both here and

              overseas.

              Condition – 8/10

              $500- 1,000

              71.png (372463 bytes) 71 (2).png (408765 bytes)

               71 (3).png (410523 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $1350


72          McCoy Tri Zap

              An original unrestored three finner design by

              Geoff McCoy.  Measures 6’2” x 19 ½” and a

              custom order from 1983 in amazing condition.

              Great period spray, lots of cool decals and one of

              the longest tri zaps. 

              Condition – 9/10.

              Rare models in this condition rarely come onto the

              market.

              $600 – 1,200

              72.png (748295 bytes) 72 (3).png (766796 bytes)

              72 (2).png (482016 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $3900


73          McGrigor Pintail

              Pintail single fin made in Brookvale.

              7’ long x 20”.

              A speed machine with original old style leg rope

              fitted through fin.

              1973

              $500 – 1,000

              73 (6).jpg (151336 bytes) 73 (2).jpg (111392 bytes)

              73 (4).jpg (102561 bytes)

  HAMMER PRICE $800


             

74          McGrigor Single Fin Swallow Tail

              6’ long x 20”

              Shaped by Barry King.

              Restored, white pigment deck, blue pigment

              bottom with pin lines.

              1970 model.

              $200 - 400

              74 (2).jpg (82196 bytes) 74 (8).jpg (84823 bytes)

              74 (4).jpg (99082 bytes) 74 (6).jpg (61107 bytes)

  HAMMER PRICE $400


             

75          No Lot


                          

76          McTavish Sky Bluebird Twin Fin

              1979 model.

              Swallow tail with flyers.

              Signed and shaped by Bob McTavish.

              5’11” long x 20 ½”.

              $300 - 600

              76 (8).jpg (90993 bytes) 76 (4).jpg (61631 bytes)

               76 (6).jpg (49759 bytes)

  HAMMER PRICE $825


             

77          McTavish Tri Fin

              An original tri-fin or 3 finner from the early

              1980s period and shaped by Bob McTavish.

              It measures 6’1” x 19” and features a regular

              single fin along with two small stabilizer fins. 

              Bob was at the forefront of the whole short board

              revolution and his early shapes are very

              collectable.

              $300 - 600

             77.png (514132 bytes)  77 (3).png (533573 bytes)

             77 (2).png (406317 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $350


78          Michael Peterson – Fangtail (Replica)

              6’2” x 20”

              Fangtail replica of the board that Michael made

              famous in 1974, when he won the Pa Bendall

              Memorial Contest on the Sunshine Coast.

             

              Michael says he only built 5 fangtails in ‘74

              as they took so long to shape and the glasser and

              sander hated having to work on them because of all

              the grooves and corners.

              $600 – 1,200

              78.png (426535 bytes) 78 (5).png (448263 bytes)

             78 (2).png (519372 bytes) 78 (3).png (563824 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $2300


79          Michael Petersen – Morning of the Earth

              5’10” x 20 1/2”

              M.O.T.E. model surfboard by the great Michael

              Petersen.

              Excellent condition.

              $800 – 1,600

              79.png (463853 bytes) 79 (6).png (517776 bytes)

             79 (3).png (386994 bytes) 79 (2).png (555939 bytes)

             79 (4).png (464223 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $2900


80          Morning Star Col Smith model

              Twin fin with flyers.

              6’4” long x 20”

              Shaped by Col Smith.

              Has star logos top and bottom.

              Immaculate condition.

              $500 – 1,000

              80 (6).jpg (69029 bytes) 80 (2).jpg (64289 bytes)

              80 (4).jpg (61228 bytes)

  HAMMER PRICE $1100


             

81          Morning Star Stinger Fin

              6’9” long x 21”

              Swallow tail, shaped by Col Smith (Narrabeen).

              1975 scarce design example.

              $350 - 700

              81 (10).jpg (82388 bytes) 81 (2).jpg (93964 bytes)

              81 (6).jpg (62951 bytes) 81 (4).jpg (90060 bytes)

  HAMMER PRICE $750


             

82          Natural Joy Bamboo Twin Fin

              Crafted by the elusive Addy J, c.2009 from

              bamboo etc that he has growing on his property

              in the Tweed hinterland.

             

              This 6’ x 21” twin fin was custom built for

              legendary Billabong and Reef “free surfer”

              Brendan “Margo” Margieson a few years back.

              To many Margo was the original professional free

              Surfer.

              Condition – 9/10.

              $500 – 1,000

              

          

          

              Image/s courtesy vonweirdos.com

HAMMER PRICE $725


83          Nipper Wiliams

              Circa 1969 short board by Nipper Williams of

              Brookvale, Sydney.

              Measures 7’8” x 21” and features a resin glue-up

              and a fabulous Greenough inspired plastic fin.

              Condition – very good with later added leg rope plug.

              $400 - 800

             

             

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $475


84          Oceanic Single Stringer

              9’6” x 22”

              “D” fin, circa 1961

              Custom built, orange and brown striping on deck.

              Clear bottom.

              Excellent condition.

              $750 – 1,500

              84 (4).jpg (62116 bytes) 84 (2).jpg (60391 bytes)

  HAMMER PRICE $1450


             

85          Odyssey Thruster

              Thruster with flyers.

              Bruce Smith design.

              Unusual Bell shaped tail with channels.

              6’ long x 20”

              Good condition.

              Very unusual board.

              $250 – 500

              85 (8).jpg (79367 bytes) 85 (2).jpg (67318 bytes)

             85 (6).jpg (117069 bytes)

  HAMMER PRICE $500


             

86          Outer Island Penta Fin Flextail

              7’6” x 19 ½” x 2 11/16”

              Shaped by Mitchell Rae, this flextail twin stringer.

              Finished in a very attractive red.

              Retro model.

              Excellent condition.

              $750 – 1,500

              86 (14).jpg (45406 bytes) 86 (2).jpg (40063 bytes)

              86 (12).jpg (45312 bytes)

  HAMMER PRICE $750


             

87          Outer Island Surfboards Flextail

              6’7” x 20”

              Shaped by the innovative Mitchell Rae, this

              1980 replica flextail was a step ahead of the rest.

              Very pointy nose with flextail at rear and single fin

              with one stringer. A great example of workmanship

              and art on a very practical and responsive surfboard.

              $750 – 1,500

              87 (16).jpg (44684 bytes) 87 (2).jpg (45743 bytes)

             87 (8).jpg (61378 bytes)  

             Unsold


             

88          Phil Usher Double Flyer Swallow

              5’10” x 20”

              Double flyer swallow channel bottom single fin

              Circa. 1978

              Phil and Nev Hyman were originally based in WA

              doing Odyssey Surfboards.

              $250 - 500

              88.png (493638 bytes) 88 (3).png (725784 bytes)

             88 (2).png (482415 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $600


89          Red Hot Sticks Single Fin Pintail – Barry Day

              6’11” long x 21”

              Red Hot Sticks is Ian Cairns’ own label and this board

              was shaped by him for Barry Day, a WA Champion.

              1975. Quite rare

              $125 - 250

              89 (10).jpg (88178 bytes) 89 (2).jpg (88332 bytes)

              89 (4).jpg (90856 bytes)

  HAMMER PRICE $650


             

90          Reno Abellira Gun

              9’5” x 19 Ό”

              Hawaii Surfboards pintail gun, attractive yellow gloss.

              Shaped by the master shaper, Reno Abellira in 2011.

              $1,800 – 3,600

              90 (12).jpg (36596 bytes) 90 (2).jpg (34035 bytes)

             90 (10).jpg (39060 bytes)  90 (6).jpg (89861 bytes)

HAMMER PRICE $4400


 

             

91          Richard Harvey Surf Company Burleigh Heads

              Swallowtail

              6’3” x 20”. 1977.

              Shaped by Australian champ Dick Harvey for

              The Burleigh Surf Company.

              Apparently only surfed a handful of times before

              storage out on the farm for over 30 years.

              Condition – 9/10

              $500 – 1,000

             

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $1000


92          Richard Harvey Triple Stringer Thruster

              8’ x 21 ½”

              Made by Richard in 2008.

              This very attractive board has three stringers and

              a timber tail block.

              Attractive red board with white pin stripes

              surrounding the stringers.

              $600 – 1,200

              92 (10).jpg (43956 bytes) 92 (2).jpg (44923 bytes)

              92 (4).jpg (94765 bytes) 92 (8).jpg (46507 bytes)

  HAMMER PRICE $1200


             

93          Rip Curl Single Fin Wayne Lynch

              Shaped and signed by Wayne Lynch.

              1976/77

              5’11” long x 20”

              Swallow tail with flyers.

              Very clean and attractive board.

              $600 – 1,200

              93 (10).jpg (80238 bytes) 93 (2).jpg (79502 bytes)

              93 (4).jpg (91645 bytes) 93 (6).jpg (51659 bytes)

  HAMMER PRICE $3700


             

94          Ron Custom Longboard

              9’9” x 21 ½”

              Estimated 1961, triple stringer D fin.

              Excellent condition.

              $900 – 1800

              94 (4).jpg (46962 bytes) 94 (2).jpg (67283 bytes)

  HAMMER PRICE $2700


             

95          Sam Egan Egg by Neal Purchase

              This is an original example of a super short

              S deck egg that was meant as a standup board

              Measuring 4’8” x 19”. 1970.

              As short as you could go and still stand up, and

              very rare along with the first generation short twin

              fins. Not a pop-out but hand shaped, with the fin

              glassed into a purpose-built glass fin box.

              Condition – rates a 6/10 with plenty of repaired

              dings and sunburn etc, but a rare and collectable

              board.

              $200 – 450

             

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $420


             

96          San Juan Gun by Bob McTavish

              The bottom and rails have been sprayed with the

              deck left original, and then a fresh gloss coat

              applied. It had been hanging on the top of McTavish’s

              shop wall 15’ off the ground for four years.

              6’11” x 18”. 1972.

              $600 – 1,200

              96 (2).png (612365 bytes) 96 (3).png (632346 bytes)

             96.png (552083 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $650


97          San Juan Single Fin by Frank Latta

              5’10 ½” long x 20”

              Wide area pintail, shaped by Frank Latta.

              Yellow rail deck, red pinlines, blue fade spray.

              Famous script log.

              Circa 1978.

              Good condition.

              $250 – 500

              97 (10).jpg (87787 bytes) 97 (2).jpg (82431 bytes)

               97 (4).jpg (88862 bytes) 97 (6).jpg (32267 bytes)

  HAMMER PRICE $700


             

98          Scott Dillon Stringerless

              8’4” long x 24”

              Stubb tail design.

              V bottom tail.

              Partly restored.

              Circa 1968.

              $450 – 900

              98 (10).jpg (80605 bytes) 98 (2).jpg (86594 bytes)

              98 (4).jpg (44272 bytes) 98 (8).jpg (43879 bytes)

  HAMMER PRICE $600


             

99          Shane by Paul Holmes

              Very rare shape by Paul Holmes with the famous

              MP tube logo and Shane surfboards overlay on the

              decal makes this a very collectable item.

              6’8” x 19 ½” and about 3” thick.

              Condition : outstanding deck with no plug, 9/10,

              Unrestored.

              $500 – 1,000

              99.png (491648 bytes) 99 (3).png (502629 bytes)

              99 (5).png (524884 bytes) 99 (2).png (595286 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $1350


100        Shane Stinger by Bob Kennerson

              Here’s a rare crescent head single fin shaped by Bob

              Kennerson in the early ‘70s for Shane.

              Several of the Sydney manufacturers opened outlets

              in country areas to get in on the soul scene, and this

              is a great example. C. 1974

              A 7’ x 20” stinger-type design diamond tail, red with

              red and yellow pin lines.

              Condition – 7/10

              $400 - 800

             

       

              Image/s courtesy vonweirdos.com  

             HAMMER PRICE $1100


101        Sky Chris Brock

              A very unusual and original shape by Chris Brock

              that we’ll call a double ender.

              5’8” x 20” with a round nose and two glassed on

              fins plus a glass removable tail fin, which would make

              it a versatile rider.

              Condition - 7/10.

              $200 - 400

             

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $200


102        Sky Stinger by Chris Brock

              This 6’4” x 20” Brock designed stinger round tail is a

              very complex shape with various planning surfaces

              and subtle concaves. 1975.

             

              Chris Brock is one of the most innovative shapers in

              Australia and was influenced by his long-time friend

              And designer George Greenough.

             

              This board reflect many of their shared ideas from the

              70s period.

             

              Condition – the decks a healthy 8/10 but the bottom

              has met with a few Lennox rocks over the years and

              rates a 7/10. Has been kept original with old school

              ding repairs only.

             

              An important example of surfboard design from the

              Mid ‘70s and displays well.

              $400 - 800

             

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $825


103        Southernman Surfboards

              6’ x 20”

              Shaped for the Corner Surf Shop in Geraldton by

              Greg Antcliff, who was an ex-Newcastle boy and

              represented New South Wales.  Named the Kalbarri

              Model, this was No.2 board that he shaped in 1976/77

              while working at Geraldton.  Designed for the Kalbarri

              Left, this is a tidy looking board, being a single fin

              with flyers.  Attractive logos.

              $200 – 400

              103 (15).jpg (51698 bytes) 103 (2).jpg (57313 bytes)

              103 (12).jpg (48940 bytes)

  HAMMER PRICE $400


             

104        Steve Lis Fish

              5’8” long x 20”

              1979.

              From the man who created the “Fish” phenomenon.

              A super clean Steve Lis Fish.  This board is a refined

              version with fluted wings, parallel wood foiled fins and

              red air brushed rails, with unique hand drawn

              controversial Lis logo, featuring the Swastika top and

              Bottom.  Super clean refurbished condition.

              Considering this board is 3 decades old it is

              amazing how contemporary it looks compared

              to today’s version of the “Fish”.

              $750 – 1,500

              104 (10).jpg (55120 bytes) 104 (2).jpg (56816 bytes)

              104 (4).jpg (84795 bytes) 104 (8).jpg (54363 bytes)

  HAMMER PRICE $2100


             

105        Strapper

              6’1” x 21”

              Turbo quad fin with scoop deck.

              1981 model.

              Excellent condition.

              $400 – 800

              105 (4).png (771098 bytes) 105.png (668421 bytes)

              105 (3).png (615748 bytes) 105 (2).png (634863 bytes)

  HAMMER PRICE $450


             

106        Sunchaser

              6’ x 20”

              Channel bottom flyer pin.

              Condition 9.5/10, unrestored, original,

              Circa 1981.

              $450 - 900

              106.png (573196 bytes) 106 (4).png (684833 bytes)

              106 (2).png (566226 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $850


107        Surf Line Hawaii Mini Gun

              Shaped by ex-Hawaiian Duke champion

              (1972 and 1976) James Jones in 1975 for

              Randy Rarrick’s label “Surf Line” Hawaii.

              Length 7’6” x 18 ½”, a mini gun.

              $1,100 – 2,200

              107.png (607767 bytes) 107 (3).png (547809 bytes)

             107 (2).png (503637 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $1000


108        Surf Line shaped by Ben Aipa

              5’6” x 19” circa 1979

              Swallow tail with multiple flyers.

              Excellent condition.

              Attractive red duco.

              $300 – 600

              108 (5).jpg (50763 bytes) 108.jpg (61712 bytes)

             108 (3).jpg (73468 bytes) 108 (2).jpg (59631 bytes)

  HAMMER PRICE $1500


             

109        Surfing’s New Image

              Shaped by Donald Takayama.  This board is

              7’8” long x 19”, single fin with 2 side glass fins on

              rails at rear, approximately 1 1/4” high.  Single

              stringer, light green deck with slight tinge on bottom

              and pin stripes.  Very good condition.  This board was

              made in the mid 70’s before Donald started his

              current label, Hawaiian Pro Designs.

              $300 – 600

              109.jpg (29678 bytes) 109 (2).jpg (44179 bytes)

              109 (3).jpg (84717 bytes) 109 (4).jpg (71792 bytes)

  HAMMER PRICE $750


             

110        Tony Olsson Competition Special

              8’7” x 23” vee bottom diamond tail by

              Tony Olsson from late 1967. A great looking

              original board from Victoria, and displays very

              well in unrestored condition.

              $400 - 800

              110 (5).jpg (45328 bytes)

              Image/s courtesy vonweirdos.com

  HAMMER PRICE $900


111        Town & Country Thruster

              5’9 ½” x 20”

              Square tail with channels.

              Great kangaroo logo on nose.

              1981. Shaped by Dave Brash. Great spray job.

              $100 - 250

              111.jpg (91905 bytes) 111 (3).jpg (121439 bytes)

            111 (2).jpg (74190 bytes)

  HAMMER PRICE $625


             

112        Trigger Bros Single Fin

              Pin tail double flyers, great logos.

              6’11” x 20”

              Lovely display board.  1977.

              $150 - 300

              112.jpg (70190 bytes) 112 (4).jpg (66262 bytes)

               112 (2).jpg (64008 bytes)

  HAMMER PRICE $450


             

113        Trigger Bros. Twin Fin

              Mid-70s Victorian twin fin by the well known

              Trigger Brothers.

              At 6’5” x 20” with a flyer pintail and the fins

              right on the flyers this would be an interesting

              board to ride.

              Overall condition is good.

              $150 - 300

              113.png (909289 bytes) 113 (3).png (698457 bytes)

              113 (2).png (544799 bytes)

              Image/s courtesy vonweirdos.com

HAMMER PRICE $650


114        Wallace Single Fin Tear drop

              5’7” x 22”, 1969.

              Single stringer pintail, tear drop shape with fin box,

              signed by Bill.

              Some sun damage.

              $600 – 1,200

              114.jpg (35902 bytes) 114 (2).jpg (29412 bytes)

  HAMMER PRICE $2200


             

115        West Coast Bonza Swallow Tail

              6’10” long x 19”

              An unusual board from West Coast.

              Clear top with blue jel coat bottom.

              $150 – 300

              115.jpg (90712 bytes) 115 (2).jpg (89123 bytes)

              115 (3).jpg (96275 bytes) 115 (4).jpg (42681 bytes)

  HAMMER PRICE $525


             

116        West Coast Surfboards Single Fin

              5’7” long x 20”

              Has “S” deck.

              Very thick with high nose rocker.

              Interesting shape. 1971

              $200 – 400

              116.jpg (69630 bytes) 116 (2).jpg (77877 bytes)

              116 (4).jpg (32938 bytes)

  HAMMER PRICE $325


             

117        Woosley Pintail

              A Classic 1968 pintail shaped by Rod Teys

              for Woosley, one of Queensland’s big names in

              surfboard manufacturing for that decade, and

              very popular both on the Gold and Sunshine

              Coasts.

             

              Condition – very good 8/10

             

              Comes with the original black SAFE set fin

              as well as the handcrafted fiberglass replica.

              These fins are very sought after.

              $400 - 900

           

           

            Image/s courtesy vonweirdos.com

 

HAMMER PRICE $825

             


 

 

 

 

IMAGES ARE REPRESENTATIONS ONLY AND COLOURS
MAY NOT BE TRUE TO THE ARTWORK/ITEM